Proxon APM 2K Premium
PROXON APM 2K PREMIUM is a two-component waterproofing system with refined cement, polymers, and additives for excellent elasticity, durability, and superior resistance to water.
What
Why?
- Superior chemical bond
- High abrasion resistance
- Optimized polymer ratio
- Enhanced crack control
- Resists water pressure
- Easy, cost-effective application
Usage
How to use?
- Clean surface thoroughly
- No excess water
- Maintain correct thickness
- Avoid rain post-application
- Use in 10–40°C only
- Perpendicular second coat
Application
Surface preparation: Ensure all surfaces are sound, clean & free from dust, oil, grease, paint, laitance, or any loose particles. Mechanically roughen smooth substrates using methods like scabbling or needle gunning. Corroded steel should be fully exposed & cleaned to a bright metal finish using emery cloth, grit, or sandblasting.
Mixing and Application: Mix the entire pack at once to maintain consistency. Add 5% clean water (375 ml for a 7.5 kg kit) and thoroughly combine the liquid and powder
components until a smooth, lump-free paste is achieved. Use dry-pack form for pre-filling cracks if necessary.
Application: Pre-wet the substrate without leaving standing water. Apply the first coat evenly using a brush or roller. Allow 6–7 hours of drying before applying the second coat in a perpendicular direction. Avoid working in temperatures below 10°C or above 40°C. Protect surfaces for 24–48 hours post-application. Clean tools & equip- ment with water immediately after use.
Packing
40 Kg unit.
Part A (Powder): 30 Kg.
Part B (Liquid): 10 Kg.
Coverage
1.7 kg / 1 sqm / 2 coats @ 0.8 to 1mm thickness.