PROXON CPRX
PROXON CPRX
Why?
- Cold applied, easy brushing
- Rubber latex modified bitumen
- Strong adhesive for substrates
- Excellent bitumen rubber bonding
- Suitable for various surfaces
- Durable and flexible seal
Usage
How to use?
- Clean the surface before application
- Apply single coat both sides
- Let surfaces cure partially
- Press thermocole firmly on concrete
- Allow bonding for 24 hours
- Clean tools with water
Application
Surface preparation:
Ensure the surface is clean, dry, and free from water, oil, grease, and loose particles. Remove all dust before application.
Application:
Apply a single coat of PROXON CPRX on both the concrete surface & the thermo- cole insulation board using a brush. Allow both coated surfaces to cure until they are 60-70% dry. Once tacky, press the thermo- cole firmly onto the concrete to ensure proper bonding without air gaps. Allow to cure for at least 24 hours for strong adhe- sion.
Cleaning:
Clean all tools used for applying PROXON CPRX with water immediately after use, before the adhesive dries.
Packing
Coverage
Shelf Life
Safety
Keep container lid tightly closed when not in use. Wear goggles and gloves during appli- cation. After use, wash hands thoroughly with water to ensure safety and cleanliness.