PROXON HEAT GUARD
What
Why?
- Minimal surface preparation
- Crack bridging elastomeric
- UV & IR resistant
- Anti-algal, anti-fungal
- Strong substrate adhesion
- Energy-saving, washable
Usage
How to use?
- Surface must dry
- Remove dust, grease
- Abrade metal surfaces
- Clean existing coatings
- Apply primer coat
- Use two coats
Application
Surface Preparation:
Concrete and masonry must be at least 14 days old with moisture content below 7%. The surface should be dry, free from dust, grease, oil, and contaminants. Cleaning can be done using wire brushing, grit blast- ing, or high-pressure water jetting. Bitu- men-based membranes must be removed. Old terraces should be checked for cracks and repaired with PROXON PATCHREP FR or PROXON SBR MORTAR.
Metal surfaces should be abraded to remove rust and existing paint, with rusted sheets primed using an anti-corrosive primer.
Priming:
Apply a primer coat using PROXON HEAT GUARD diluted with 20% clean water for better bonding.
Mixing:
Stir PROXON HEAT GUARD well for a homo- geneous mix before application.
Application:
Once the primer dries, apply PROXON HEAT GUARD using a brush, roller, or airless