PROXON SBR
What
Why?
- Strong bond and adhesion
- Reduces shrinkage cracks
- Increases abrasion resistance
- Multipurpose, economical, easy
- Low WC, higher durability
- Controls corrosion in steel
Usage
How to use?
- Clean and prepare surfaces
- Apply bonding slurry coat
- Mix cement, sand, PROXON SBR
- Use correct water ratio
- Apply mortar while tacky
- Compact, level, and finish
Application
Dosage & Functional Prescription:
Latex Polymer Modified Mortar (LPMM)
For general mortar mix, use 50kg cement, 280kg sand, and 5 liters PROXON SBR with minimum water for workability (1:1 ratio PROXON SBR to water).
For thick bed mortar, screed, or renders above 15mm thickness, increase PROXON SBR to 7.5 liters. For chemical-resistant applications like battery rooms or water treatment areas, increase to 10 liters. For thin bedding or screeds, use 1:1 cement-sand mix with 5 liters PROXON SBR per 50kg cement.
For bonding slurry, mix 1:1.5 PROXON SBR to cement, apply to tacky, and follow with mortar application. For gypsum or light
weight plaster, prime with 1:1 PROXON SBR to cement. For heavy rendering, prepare 1:2 PROXON SBR to cement slurry.
Surface preparation, Mixing & Application: Application surfaces must be clean, sound, and free from oil, grease, or loose particles. Dampen hot or absorbent surfaces before applying or prime with 1:8 (Proxon SBR: Water). For existing concrete, roughen smooth areas. Cut back damaged con- crete to sound material. Use manual mixing or rotating blade mixers, avoiding excess air. Apply bonding primer slurry coat and fresh mortar while tacky. For wa- ter-resistant renders, apply two slurry coats at right angles, minimum 1.5mm thickness.
Packing
Shelf Life
Safety
Contains no hazardous substances but avoid contact with skin or eyes. Use gloves and goggles. In case of contact, rinse immediately. If swallowed, seek medical attention. Refer to MSDS for complete details.