PROXON SLURRY 2K
What
Why?
- Excellent adhesion all surfaces
- Safe for potable water
- Seamless and hard wearing
- Allows water vapor permeation
- Resists carbonation, chloride diffusion
- Applicable on fresh concrete
Usage
How to use?
- Clean, dust-free surface
- Pre-wet without standing water
- Mix powder into liquid
- Apply by brush/roller
- Use mesh on joints
- Allow curing between coats
Application
Surface Preparation:
The surface must be clean, dry, and free from oil, grease, dust, or loose particles. Use wire brush or water jet for cleaning. For contaminated areas, grit blasting is rec- ommended. Pre-wet the surface before applying PROXON SLURRY 2K, ensuring no standing water. All construction joints should be checked and sealed with non-shrink grout if necessary. For internal water tanks, carefully grout all inlet/outlet pipes using PROXON non-shrink grout.
Mixing:
PROXON SLURRY 2K is supplied in two pre-measured parts (powder and liquid).
Mix in a 2:1 ratio (powder to liquid) using aslow-speed drill (100-150 rpm). Avoid adding water at any stage.
Application:
Apply PROXON SLURRY 2K on pre-wet sur- faces using brush or roller, ensuring full coverage. Apply second coat after 8 hours, perpendicular to the first. Use fiber mesh reinforcement over joints and critical areas for added durability. Allow 4-5 hours between coats. Apply third coat in critical areas if needed.
Coverage
Packing
Shelf Life
Safety
Contains no hazardous substances. Use gloves, goggles, safety shoes, and masks when handling. Reseal containers after use. In case of contact, rinse with water. If swal- lowed, seek medical attention immediately. Refer to MSDS.