PROXON ZINC RP
What
Why?
- Easy to apply
- Anti-corrosive primer
- Prevents corrosion growth
- Excellent steel adhesion
- Fast drying time
- Suitable topcoats compatibility
Usage
How to use?
- Clean, dry surface
- Remove weld spatter
- Abrasive blast clean
- Apply zinc primer
- Mix components thoroughly
- Clean tools immediately
Application
Surface Preparation:
The surface must be clean and dry. Remove weld spatter, smooth seams, sharp edges, oil, grease, and other con- taminants. Surface defects revealed after blast cleaning should be treated. Abrasive blast to AS 2 1/1 Swedish standard SIS 055900. Clean corroded reinforcement using PROXON RUST RC and wire brush thoroughly. Apply PROXON RUST RC on sur- faces prepared per the Swedish standard. If oxidation occurs, reblast accordingly.
Shop Primed Steel:
Weld seams or damaged areas must be blast cleaned. For widespread primer breakdown, perform overall sweep blast- ing.
Mixing:
Mix Part B into Part A using a slow-speed mixer for 2–3 minutes until uniform.
Application:
Airless spray: Tip size 0.43–0.53 mm
Pressure: ≥176 kg/cm²
Brush/roller for small areas
Conventional spray: Use suitable agitating equipment
Cleaning:
Use organic solvent immediately after application. Hardened material requires mechanical cleaning.